Network Appliance NS0-502 certificate can help you a lot. It can help you improve your job and living standard, and having it can give you a great sum of wealth. Network Appliance certification NS0-502 exam is a test of the level of knowledge of IT professionals. DumpLeader has developed the best and the most accurate training materials about Network Appliance certification NS0-502 exam. Now DumpLeader can provide you the most comprehensive training materials about Network Appliance NS0-502 exam, including exam practice questions and answers.
What do you think of Network Appliance NS0-502 certification exam? As one of the most popular Network Appliance certification exams, NS0-502 test is also very important. When you are looking for reference materials in order to better prepare for the exam, you will find it is very hard to get the excellent exam dumps. What should we do? It doesn't matter. DumpLeader is well aware of your aspirations and provide you with the best certification training dumps to satisfy your demands.
While most people would think passing Network Appliance certification NS0-502 exam is difficult. However, if you choose DumpLeader, you will find gaining Network Appliance certification NS0-502 exam certificate is not so difficult. DumpLeader training tool is very comprehensive and includes online services and after-sales service. Professional research data is our online service and it contains simulation training examination and practice questions and answers about Network Appliance certification NS0-502 exam. DumpLeader's after-sales service is not only to provide the latest exam practice questions and answers and dynamic news about Network Appliance NS0-502 certification, but also constantly updated exam practice questions and answers and binding.
For easy use, DumpLeader provides you with different version exam dumps. PDF version dumps are easy to read and reproduce the real exam. SOFT version dumps is a test engine which can measure what your preparations for the exam. If you want to know whether you prepare well for the test, you can take advantage of the SOFT version dumps to measure your ability. So you can quickly know your weaknesses and shortcomings, which is helpful to your further study.
A lot of my friends from IT industry in order to pass Network Appliance certification NS0-502 exam have spend a lot of time and effort, but they did not choose training courses or online training, so passing the exam is so difficult for them and generally, the disposable passing rate is very low. Fortunately, DumpLeader can provide you the most reliable training tool for you. DumpLeader provide training resource that include simulation test software, simulation test, practice questions and answers about Network Appliance certification NS0-502 exam. We can provide the best and latest practice questions and answers of Network Appliance certification NS0-502 exam to meet your need.
In real life, every great career must have the confidence to take the first step. When you suspect your level of knowledge, and cramming before the exam, do you think of how to pass the Network Appliance NS0-502 exam with confidence? Do not worry, DumpLeader is the only provider of training materials that can help you to pass the exam. Our training materials, including questions and answers, the pass rate can reach 100%. With DumpLeader Network Appliance NS0-502 exam training materials, you can begin your first step forward. When you get the certification of Network Appliance NS0-502 exam, the glorious period of your career will start.
Exam Code: NS0-502
Exam Name: Network Appliance (NetApp Certified Implementation Engineer-SAN and Virtualization)
One year free update, No help, Full refund!
Total Q&A: 106 Questions and Answers
Last Update: 2014-01-29
NS0-502 Free Demo Download: http://www.dumpleader.com/NS0-502_exam.html
NO.1 Which utility on Solaris 10 can be used to collect information about firmware and driver versions for an
Emulex LP1xxxx/LPe1xxxx HBA?
A. EMutil
B. SANutil
C. hbainfo
D. SANsurfer
E. HBAnywhere
Answer: E
Network Appliance practice test NS0-502 NS0-502 NS0-502 NS0-502
NO.2 Any newly installed system with Data ONTAP 7.3.1 supports which cfmode?
A. dual_fabric only
B. single_image
C. partner
D. mixed
Answer: B
Network Appliance NS0-502 exam NS0-502 practice test
NO.3 Click the Exhibit button.
In the diagram shown, a portset is created on controller 1 with the command: controller1>portset create -f
ntapportset 0b. This portset is bound to the igroup with all the initiators in it.
How many paths can host 1 see to a LUN on controller 1?
A. six paths
B. four paths
C. eight paths
D. two paths
Answer: D
Network Appliance NS0-502 study guide NS0-502
NO.4 A 100-GB thinly provisioned LUN is allocated to a Windows host. 100 GB of data is written into the
LUN. The current capacity utilization on the disk array as well as the host is 100%. 50 GB of data is
deleted from the LUN. Space reclaimer has NOT been run.
What is the current capacity utilization on both the host and the disk array?
A. 50% on the host, 100% on the disk array
B. 100% on the host, 50% on the disk array
C. 50% on the host, 50% on the disk array
D. 100% on the host, 100% on the disk array
Answer: A
Network Appliance Bootcamp NS0-502 NS0-502 exam NS0-502 pdf
NO.5 An organization currently has a NetApp Fibre Channel block-based solution. With limited budget and
resources, they want to create a new disaster recovery site that utilizes a NetApp solution.
What would the optimal solution include?
A. SnapMover and Fibre Channel at the disaster recovery site for all hosts
B. SnapMirror and iSCSI at the disaster recovery site for all hosts
C. Fibre Channel at both locations using ftp to replicate storage
D. MetroCluster and NAS
Answer: B
Network Appliance answers real questions NS0-502 study guide NS0-502 certification training NS0-502 test questions NS0-502
NO.6 Click the Exhibit button.
Based on the diagram shown, what is the appropriate FC switch topology?
A. core-edge
B. full mesh
C. partial mesh
D. partial cascade
Answer: C
Network Appliance NS0-502 Braindumps NS0-502 NS0-502 test questions
NO.7 A company has a Fibre Channel environment and wants to connect a new host in a remote data
center using 50/125um OM2 multi-mode fiber cable and needs to support 2 Gb speeds.
What is the maximum distance of the cable run supported in this situation?
A. 50/125um OM2 multi-mode fiber cable supports up to 500 meters at 2 Gb.
B. 50/125um OM2 multi-mode fiber cable supports up to 10000 meters at 2 Gb.
C. 50/125um OM2 multi-mode fiber cable supports up to 150 meters at 2 Gb.
D. 50/125um OM2 multi-mode fiber cable supports up to 300 meters at 2 Gb.
Answer: D
Network Appliance NS0-502 NS0-502 NS0-502 pdf NS0-502
NO.8 Which utility on Windows 2003 and Windows 2008 can be used to collect information about firmware
and driver versions for an Emulex LP1xxxx/LPe1xxx HBA?
A. EMutil
B. SANutil
C. fcp config
D. SANsurfer
E. HBAnywhere
Answer: E
Network Appliance certification Braindumps NS0-502 NS0-502 Bootcamp NS0-502 study guide NS0-502 Braindumps NS0-502
NO.9 Click the Exhibit button.
You see the following error on the storage controller's console or messages file.
What is the most likely cause for this error?
A. portal group misconfiguration
B. iSCSI CHAP misconfiguration
C. iSNS misconfiguration
D. IPsec misconfiguration
Answer: B
Network Appliance NS0-502 NS0-502 braindump NS0-502 exam prep
NO.10 Which FC SAN topology provides the best performance and scalability?
A. cascade
B. core-edge
C. full mesh
D. partial mesh
Answer: B
Network Appliance NS0-502 dumps NS0-502 demo NS0-502
NO.11 What would you use to share a data LUN among multiple servers where each server has simultaneous
write access?
A. host-based BootBIOS
B. host-based multipathing
C. host-based volume manager
D. host-based clustered file system
Answer: D
Network Appliance demo NS0-502 dumps NS0-502 practice questions NS0-502 test NS0-502 dumps NS0-502
NO.12 Click the Exhibit button.
Given the information provided in the diagram, what is the appropriate FC topology?
A. point-to-point
B. switched fabric
C. arbitrated loop
D. ring
Answer: B
Network Appliance practice test NS0-502 NS0-502 questions
NO.13 A customer has a four-node SUN cluster configuration. Each node has two, dual-ported HBAs.
What is the minimum number of igroups that need to be created to map a LUN to the cluster?
A. 1
B. 2
C. 4
D. 8
Answer: A
Network Appliance dumps NS0-502 NS0-502 study guide NS0-502 NS0-502 exam
NO.14 Zoning by World Wide Port Name (WWPN) is deployed and a host HBA is replaced.
Which zone change needs to be made?
A. No changes are necessary.
B. The zone configuration should be changed to include the port to which the HBA is connected.
C. The zone configuration should be changed to include the WWPN of the new HBA; the old WWPN will
be automatically dropped.
D. The zone configuration should be changed to include the WWPN of the new HBA and to remove the
WWPN of the old HBA.
Answer: D
Network Appliance pdf NS0-502 NS0-502 test
NO.15 Which utility on Solaris 10 can be used to collect information about firmware and driver versions for a
Qlogic QLAxxx/QLExxxx HBA?
A. EMutil
B. SANutil
C. cfgadmin
D. SANsurfer
E. HBAnywhere
Answer: D
Network Appliance study guide NS0-502 original questions NS0-502 questions NS0-502 certification
NO.16 What are three relevant perfstat counters to check for unaligned I/O that do not fall on the WAFL
boundary? (Choose three.)
A. wp.partial_write
B. vvol_read.io_valid
C. read/write_align_histo.XX
D. read/write_partial_blocks.XX
E. xinode content misses
Answer: ACD
Network Appliance NS0-502 test questions Braindumps NS0-502
NO.17 Which three protocols can be used for communications between a host running SnapDrive for
Windows and the NetApp Storage Controllers? (Choose three.)
A. http:
B. https:
C. ftp:
D. RPC
E. ssh
Answer: ABD
Network Appliance NS0-502 NS0-502 answers real questions NS0-502 NS0-502 braindump
NO.18 Click the Exhibit button.
Based on the diagram shown, what is the appropriate FC switch topology?
A. full mesh
B. core-edge
C. full cascade
D. partial mesh
Answer: B
Network Appliance original questions NS0-502 exam dumps NS0-502 exam dumps
NO.19 Click the Exhibit Button
The table highlights the space management policy that is defined for a particular flexvol, acmevol.
Based on the information provided in the table, which action will the storage controller take when it runs
out of space in the volume?
A. It will try deleting Snapshot copies first to reclaim space before trying to grow the volume.
B. It will grow the volume before deleting Snapshot copies.
C. It will only try deleting Snapshot copies to reclaim space and will not grow the volume.
D. It is irrelevant since fractional_reserve is 0%.
Answer: C
Network Appliance NS0-502 NS0-502 NS0-502
NO.20 A 200-GB LUN is created in an empty 500-GB volume with the volume guarantee option set to Volume.
LUN reservation is enabled and the fractional reserve is set to 100 and scheduled snapshots are
disabled.
Directly after LUN creation, what is the maximum free space available in the volume?
A. 200 GB
B. 300 GB
C. 400 GB
D. 500 GB
Answer: B
Network Appliance exam simulations NS0-502 pdf NS0-502 NS0-502
DumpLeader offer the latest 700-505 exam material and high-quality HP2-N37 pdf questions & answers. Our NS0-504 VCE testing engine and JN0-633 study guide can help you pass the real exam. High-quality E20-553 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.
Article Link: http://www.dumpleader.com/NS0-502_exam.html
没有评论:
发表评论